Parkside PDRS 27 A1 Originalbetriebsanleitung Seite 76

■ Do not overreach. Keep proper footing and balance at all times.
This provides for better control over the compressed air tool in
unexpected situations.
■ Do not use the tool if its switch is defective. Any tool that cannot
be switched on or off is dangerous and must be repaired.
■ Keep compressed air tools that are not being used out of the
reach of children. Do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Compressed
air tools are dangerous in the hands of inexperienced users.
■ Treat the tool with care. Check whether moving parts function
correctly and do not jam; check whether any parts are broken or
damaged to an extent that the power tool will no longer operate
correctly. If damaged, have the tool repaired before use. Many
accidents are caused by poorly maintained tools.
■ Switch off the appliance when not in use.
■ Use personal protective equipment. Always wear eye protection.
Wearing protective equipment such as a dust mask, non-slip safe-
ty shoes, a helmet or hearing protection depending on the type
and use of the compressed air tool reduces the risk of personal
injuries.
■ Check all connections and supply lines. All maintenance units,
couplings and hoses must correspond to the appliance parame-
ters in terms of pressure and air flow. If the pressure is too low, the
function of the tool will be compromised and if the pressure is too
high, this can cause property damage and personal injury.
■ Protect the hoses against kinking, constriction, solvents and sharp
edges. Keep hoses away from heat, oil and rotating parts.
■ Ensure that the hose clamps are always tightened firmly. Loose
or damaged hose clamps can allow air to escape in an uncon-
trolled manner.
PDRS 27 A1
GB │ MT │
73 ■