Additional Safety Instructions For Pneumatic Machines - Parkside PDRS 27 A1 Originalbetriebsanleitung

■ Consumables and the machine tool should be selected, main-
tained and replaced in accordance with the recommendations in
this guide in order to avoid unnecessary increase of oscillations.
■ If possible, sleeve fittings should be used.
■ To support the weight of the machine, use a stand, clamp or a
balancing unit wherever possible.
■ Hold the machine securely but not too firmly while maintaining
the necessary hand-reaction force, as the vibration risk generally
increases the harder the machine is held.
■ An inadequately mounted or damaged accessory tool can lead
to excessive vibrations.
Additional safety instructions for pneumatic
machines
■ Compressed air can cause serious injuries:
–
When the machine is not in use, the air supply must always
be shut off and the air hose depressurised. The machine must
be disconnected from the compressed air supply before re-
placing accessories or when conducting repair work.
–
Never aim the airflow at yourself or anyone else.
■ Thrashing hoses can cause serious injury. Therefore, always
check whether the hoses and their fixings are undamaged and
have not come loose.
■ Cold air must be directed away from the hands.
■ Do not use any quick-lock couplings on the tool inlet for impact
and impulse drills. For hose connections with a thread, always
only use those made of tempered steel (or a material with compa-
rable impact resistance).
PDRS 27 A1
GB │ MT │
83 ■