Lubrication; Refilling Oil - Parkside PDRS 27 A1 Originalbetriebsanleitung

Lubrication

NOTE
► Regular lubrication is particularly important to avoid friction
and corrosion damage. We recommend using a suitable
special oil for compressed air tools (e.g. Liqui Moly compressor
oil).
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the appliance as a preparation stage after the
pressure reducer. A mist oiler gives off fine drops of oil into
the air flow and thus guarantees regular lubrication.
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions. Add 3–5 drops of
pneumatic oil into the connector nipple
Refilling oil
To ensure that the tool remains operational for a long time, the tool
must have a sufficient fill of pneumatic oil.
You have the following options:
♦ Attach a maintenance unit with an oiler to the compressor.
♦ Install an add-on oiler in the compressed air line or the com-
pressed air tool.
♦ Add 3–5 drops of pneumatic oil into the connector nipple
every 15 minutes of operation.
│ GB │ MT
■ 86
.
PDRS 27 A1