Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Notes on support for OpManager and Paessler PRTG Network Monitor
è When adding a device, check that the credentials ("password") has been used.
By default, the headend supports the "SNMP v1/v2 Public" profile (community name "public").
The following SNMP settings must be changed to also display the CPU load:
è Select Axing Device → Settings
è Scroll down to "SNMP Compatibility Options".
è Disable "Inherit from".
è Change the Walk Mode value to: "Use GETNEXT requests".
èClick Save.
4.7.
Logs
4.7.1.
Log entries
Under LOGS you can see the log entries of the headend.
·
The system log is written to the flash memory, so it is still available after rebooting the headend.
·
The status log is written to RAM and is empty after rebooting the headend.
è Choose Statuslog.
The entries of the status log are displayed.
è Choose Systemlog.
The entries of the system log are displayed.
è Click SAVE LOG to save the respective log entries as a txt file.
è Click on ERASE LOG to delete the respective log entries.
4.7.2.
Tuner monitoring
èUnder TUNER TO MONITOR you select the tuners that are to write log entries.
2021-12-13 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_SKF-42-82-00.pdf Page 21 of 24
Werbung
Kapitel
Inhaltsverzeichnis
