Switching On And Off; Adjusting The Rotational Speed; Changing The Direction Of Rotation; Maintenance And Cleaning - Parkside PBH 800 A1 Originalbetriebsanleitung

Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the device off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again.

Adjusting the rotational speed

The ON/OFF switch
control. Pressing the ON/OFF switch
yields a low speed. Increasing pressure increases
the speed.

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right.

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Never permit liquids to penetrate inside the
appliance.
■ Use a soft, dry cloth to clean the housing.
■ Clean the tool holder
CAUTION! PRELOADING!
♦ To do this, pull the locking collar
and pull the dust protector cap
of a screwdriver off the tool holder
PBH 800 A1
.
.
. Lock it in the
and release it
has a variable speed
lightly
towards the left
regularly:
backwards
with the help
.
WARNING!
► If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.

Disposal

The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the
appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
GB │ IE │
17 ■