Introduction; Intended Use; Depicted Components; Package Contents - Parkside PBH 800 A1 Originalbetriebsanleitung

HAMMER DRILL PBH 800 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The PBH 800 A1 hammer drill (hereinafter referred
to as appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance
is not intended for commercial use.

Depicted components

Locking button for the depth stop
Rotation direction switch
ON/OFF switch
Locking button for ON/OFF switch
Release button for function selector switch
Function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck
│ GB │ IE
■ 12

Package contents

1 hammer drill PBH 800 A1
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig. A)
3 SDS drill bits (6/8/10 x 150 mm) (see fig. B)
1 flat chisel (14 x 250 mm) (see fig. B)
1 depth stop
1 carrying case
1 set of operating instructions

Technical data

Rated power consumption:
Rated voltage:
Rated idling speed:
Stroke rate:
Impact energy:
Max. drill diameter:
Protection class:
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Wear hearing protection!
800 W
230 V ∼ 50 Hz
(AC)
n 0–1650 rpm
0
0–7500 rpm
1.2 J
13 mm for steel
24 mm for wood
19 mm for concrete
II / (double insulation)
L = 94 dB(A)
pA
3 dB
L = 105 dB(A)
WA
3 dB
PBH 800 A1