Before first use
■
Remove all packaging materials and protective
stickers from the appliance, especially the
protective sticker on the contacts on the back of
the hand element
■
Place the cradle
cradle
clicks into place.
NOTE
►
This appliance is supplied with non-charged
batteries. The batteries must be charged for
5–6 hours before using the appliance for
the first time.
Charging the appliance
NOTE
►
Ensure that the appliance is switched off
before starting to charge the batteries.
■
To charge the appliance, connect the charger
to a mains socket. Plug the barrel plug
the charging socket
cradle
. Feed the cable through the recess on
the rear of the cradle
not resting on the cable.
■
Place the handle with the attached hand
element
onto the cradle
indicator lamp
lights up red. When the
appliance is fully charged, the indicator light
lights up green.
■
Do not recharge the batteries until the suction
power of the appliance has become noticeably
weaker.
NOTE
►
When the batteries are weak, the charge
indicator lamp
When this happens, the appliance can be
operated for another 3 to 5 minutes.
►
Once the batteries are completely
discharged, the charge indicator lamp
flashes red five times and the appliance
switches off.
│
GB │ MT
■
42
.
onto the stand so that the
on the underside of the
so that the cradle
.The charge
starts flashing green.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
into
is
Fig. 1
■
To connect the hand element
push the tip of the hand element
opening in the hand element recess
■
Then press the grip
into the handle so that the hand element
clicks firmly into position (Fig.1).
■
To remove the hand element
press the release buttons
■
Then pull the hand element
forwards out of the hand element recess
(Fig. 2).
Fig. 2
to the handle,
into the
.
of the hand element
from the handle,
.
upwards and
SHSS 16 A1