Herunterladen Inhalt Inhalt Diese Seite drucken

Before First Use; Charging The Appliance; Assembly/Disassembly; Connecting The Hand Element To The Handle/Removal From Handle - Silvercrest SHSS 16 A1 Bedienungsanleitung

Akku-hand- und -bodenstaubsauger
Vorschau ausblenden Andere Handbücher für SHSS 16 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before first use

Remove all packaging materials and protec-
tive stickers from the appliance, especially the
protective sticker on the contacts on the back of
the hand element 4 .
Place the cradle g onto the stand so that the
cradle g clicks into place .
NOTE
This appliance is supplied with non-charged
batteries . The batteries must be charged for
5–6 hours before using the appliance for
the first time .

Charging the appliance

NOTE
Ensure that the appliance is switched off
before starting to charge the batteries .
To charge the appliance, connect the charger p
to a mains socket . Plug the barrel plug a into
the charging socket f on the underside of the
cradle g . Feed the cable through the recess on
the rear of the cradle g so that the cradle g is
not resting on the cable .
Place the handle with the attached hand ele-
ment 4 onto the cradle g .The charge indicator
lamp 3 lights up red . When the appliance is
fully charged, the indicator light 3 lights up
green .
Do not recharge the batteries until the suction
power of the appliance has become noticeably
weaker .
NOTE
When the batteries are weak, the charge
indicator lamp 3 starts flashing green .
When this happens, the appliance can be
operated for another 3 to 5 minutes .
Once the batteries are completely dis-
charged, the charge indicator lamp 3
flashes red five times and the appliance
switches off .
6 
GB │ IE │ NI │ CY

Assembly/disassembly

Connecting the hand element to the
handle/removal from handle
Fig . 1
To connect the hand element 4 to the handle,
push the tip of the hand element 4 into the
opening in the hand element recess r .
Then press the grip 1 of the hand element 4
into the handle so that the hand element 4
clicks firmly into position (Fig .1) .
To remove the hand element 4 from the handle,
press the release buttons
Then pull the hand element 4 upwards and
forwards out of the hand element recess r
(Fig . 2) .
Fig . 2
e .
SHSS 16 A1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis