hanseatic 2013C(G)3.334eETsPrDpHbJX Gebrauchsanleitung Seite 73

Fully automatic mode
This operation is used to select the desired
cooking time as well as when the dish should
be finished cooking and the oven should be
switched off. The timer automatically calcu-
lates the switch-on time.
Set cooking time and cooking end time
1. With the oven off, press and hold the
MENU button until the display shows
"0·00" and the bell symbol
2. Briefly push the MENU button once.
The display alternates between "dvr" and
"0·00".
3. Use the arrow buttons "<" and ">" to set
the desired cooking time (e.g. 1:15).
4. Briefly press the MENU button once.
The display now alternates between "End"
and the current time and the set operating
time.
5. Use the arrow keys to set the desired
cooking end time (e.g. 12:45). The switch-
off time can be max. 23:59 hours from the
current time.
6. Press the MENU button.
The display shows the current time and
the message "AUTO".
7. Set the function selector and the temper-
ature controller to the positions at which
the oven is to be operated.
Note: Only turn the function selector
clockwise, as the set time will be deleted
when the selector is turned to the 'P' po-
sition.
The oven will automatically switch on
at the calculated switch-on time (here:
11:30) and to the set cooking end time
(here: 12:45).
After the oven has switched off, an audi-
ble alarm sounds for approx. 6 minutes.
8. Briefly press the MENU button to turn off
the audible alarm.
flashes.
The oven is now switched on again
and must be switched off manually.
9. Rotate the function selector and the tem-
perature controller to the "0" position.
10. Press the MENU button for approx. 3
seconds until the "AUTO" message disap-
pears.
The display now once again shows the
current time.
Change fully automatic mode
• To view or change the cooking end time
or cooking time, follow steps 1 to 5 in
"Setting cooking time and cooking end
time".
Interrupting/ending fully
automated operation
To delete the selected settings, press
both arrow keys simultaneously for
longer (approx. 3 seconds).
The "AUTO" display goes off and the semi-au-
tomatic mode is cancelled.
The timer
WARNING
Page EN-27