Werbung
Additional Information
Additional Information
Understanding Display Messages
Below is a list of messages you'll see during normal operation of the PDR–509 together with a brief explanation of what they mean. If you need more
information, turn to the page indicated.
Message
Description
OPEN
The disc tray is open.
CLOSE
The disc tray is closing.
SET UP
The unit is setting up for recording. Wait for the message to disappear.
TOC READ
The recorder is reading the disc's
1-SYNC
The unit is in 1-track automatic digital recording mode. Recording starts when the recorder
detects the digital source input signal.
AL-SYNC
The unit is in all-track automatic digital recording mode. Recording starts when the recorder
detects the digital source input signal.
CAN NOT SYNC
This display appears when the
an analog source, or in digital mode if the source selected is not recognized as
MONI INPUT
The recorder is monitoring the input selected with the input selector. The unit displays the source
(CD, MD, DAT, DCC,DVD)
it is monitoring (
PMA REC
The recorder is writing
power while this display is showing.
TRACK ?
The recorder is waiting for you to enter a track in program play mode. Select a track using the
numeric buttons, 4 and ¢ (track skip) buttons, or jog dial.
SKIP SET ?
Confirm that you want to set a skip
SKIP CLEAR ?
Confirm that you want to set a skip
LAST ?
Confirm that you want to erase the last track of a
ALL ?
Confirm that you want to erase all tracks on a
TOC ?
Confirm that you want to erase the TOC of a finalized
state. After doing this, you can record more material on the disc.
** - [LAST] ?
Confirm that you want to erase tracks recorded on a
(** is a number)
ALL DISC ERASE?
Confirm that you want to re-initialize the
CD-R
This display is for in-store demonstration purposes. The demonstration stops when any key or
CD-RW
control is operated. If no key or control is pressed for about three minutes after the demonstration
was stopped, it will start again.
To start the demonstration mode, switch on the power with a disc loaded and press 1 as soon as
the display reads 01 00:00.
To cancel the demonstration mode, switch on the power with a disc loaded and press ¡ as soon
as the display reads 01 00:00.
(Table of Contents). Wait for the message to disappear.
TOC
button is pressed if the
DIGITAL
DIGITAL
DIGITAL SYNCHRO
DIGITAL
DIGITAL
SYNCHRO
SYNCHRO
SYNCHRO
SYNCHRO
,
,
,
, or
).
CD
MD
DAT
DCC
DVD
data to the disc's
(Program Memory Area). Never turn off the
TOC
PMA
by pressing the
ID
by pressing the
ID
–
CD
RW
–
CD
RW
CD
disc by pressing 8 (pause).
–
CD
RW
INPUT
INPUT
INPUT
INPUT
INPUT SELECTOR
SELECTOR
SELECTOR
SELECTOR
SELECTOR
,
,
, or
.
CD
MD
DAT
DCC
button.
S K I P
S K I P
S K I P I D
S K I P
S K I P
I D S E T
I D
I D
I D
S E T
S E T
S E T
S E T
button.
S K I P I D
S K I P
S K I P
S K I P
S K I P
I D
I D
I D C L E A R
I D
C L E A R
C L E A R
C L E A R
C L E A R
disc by pressing 8 (pause).
disc by pressing 8 (pause).
–
disc to return it to a non-finalized
CD
RW
–
disc .
RW
Reference
p.22
p.22
pp.31,32
p.33-36
is set for
p.51,52
p.42
p.46
p.46,47
p.55
p.55,56
p.56
P.55
p.56
p.56
57
En
Werbung
Kapitel
