Standard Equipment; Optional Accessories - Comet KF Steel 12/100 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

develop in the pressure adjustment system.

• Boiler safety thermostat.

This stops the burner working should the hydraulic circuit overheat as a result of an anomaly in the

temperature adjustment system.

• Burner Control.

This stops the burner working should the combustion flame go out.

• Pressure control/ adjustment valve

This valve is calibrated by the Manufacturer so that the operating pressure can be adjusted using the

knob (8). It enables the pumped liquid to return to the pump's suction unit, preventing the development

of dangerous pressure levels when the gun is closed or when a pressure value is set over the maximum

level allowed.

• Dry-running control.

This prevents the possibility of the burner running without water.

• Gun Lever Blocking Device.

This safety device (27) allows to lock the lever (24) on the cleaner gun (15) in the closed position,

preventing accidental activation (Fig.4, position K).

• Pressure/temperature limiting device.

Device working as described in paragraph "OPERATION IN STEAM MODE".

Check the following parts are included in the packaging of the purchased product:

• high pressure cleaner

• high pressure delivery hose with the quick fit connector

• cleaner gun;

• lance pipe

• suction unit connections kit;

• Instructions manual - safety notifications;

• instructions manual – operation and maintenance

• guarantee certificate;

• booklet with details of service centers;

• nozzle cleaning pin

If you encounter any difficulties, please get in touch with your dealer or an authorized customer service

centre.

The following range of accessories can be added to the standard equipment supplied with the high

pressure cleaner:

• hose reel

• sandblasting lance: designed for sanding surfaces, removing rust, paint and lime scale deposits, etc;

• pipe flushing probe: designed for unblocking pipes and ducts;

• rotating nozzle lance: designed for the removal of stubborn dirt;

• foaming lance: designed for a more efficient distribution of detergent

• various types of lances and nozzles.

• Connect the quick fit connector (22) on the hose (21) to the water outlet connector (12) and secure

the ring nut tightly by hand.

• Screw the connector (19) on the high pressure hose onto the thread of the cleaner gun (15) and tighten

it using two 22 mm spanners (not supplied).

• Insert the seal (34) onto the water inlet hose support (35) and screw it onto the connector (13).

IN FIG. 6.