Electrical Connection; Positioning Of The Machine - Moretti Forni iP 33 Bedienungsanleitung

Note: All packaging must be disposed of in a lawful way.
PICT. 3
The plug must be easily accessible, must not require any kind of movement. The cable from the
machine to the wall plug must not be pulled tightly, also do not rest the machine on the cable.
iP 33-45

2.3 Electrical connection

The connection type Y of the machine to the
power grid is made by the feeding cable, to
whose end a normalized and polarized plug
must be assembled (the distinction between
phase and neutral must be unequivocal).
2.4 Equipotential
The machine must have an equipotential
system. Put together the terminaI that has
the symbol on it (situated on the back side of
the machine) and a cable with a minimal
section of 2.5 to 6 mm.

2.5 Positioning of the machine

Operating manual
27