Chapter 2 Installation; Instructions For The User; Installation Methods - Moretti Forni iP 33 Bedienungsanleitung

CHAPTER 2 INSTALLATION

2.1 Instructions for the User

The environmental conditions in which the machine must be installed must follow these
characteristics: (The machine is made in such a way as to have an IP21 level of protection)
· Be dry
· Water and heat sources at safe distance
· Adequate ventilation and lighting (corresponding to hygiene and security rules following
tbe existing laws).
The surface must be horizontal, for normal ventilation of the machine no objects should obstruct.
INFORMATION
The electric net must be provided with an automatic differential switch with suitable
characteristics for the machine: the opening distance between the contacts must be of at least 3
mm. It is particularly important to have an efficient ground element. Verify that the electrical
setup corresponds with the numbers of the technical characteristics (1.3) and on the small plate
at the back of the machine.

2.2 Installation methods

The machine is supplied in a closed package and fixed with straps on a wood pallet. Inside the
packaging with the machine you will find the instructions, the declaration of conformity according
to the EEC machines regulation and the test certificate.
The machine must be unloaded and lifted out by proper equipment. For the transportation of the
machine to the place of installation, use a fork lift. After cutting the straps take out of the
packaging and the plastic cover, then with the help of a proper belt put under the machine (PICT. 3)
and a fork lift (manual or motor) lift the machine and take away the bottom pallet, position the
machine making sure you leave a space around it to make usage, cleaning and maintenance easier.
If the machine is unstable put under the feet pieces of hard rubber.
iP 33-45 Operating manual
26