CHAPTER 3 FUNCTIONING
The machine is provided with the following control, security devices and lights (PICT. 4).
3.1 Control devices and signal light devices
On the frontal panel
A- Thermostat to regulate temperature of the upper plate
B- Thermostat to regulate temperature of the lower plate
A1/B1- On of signal of the heating elements
C- Start buttons up/down cycle of the lower plate
D- Timer to regulate time of pressure
D1- Button times selection
D2- Stop time signal
E- General swicht
E1- On/off Signal of the machine
Under the lower pIate:
F- Regulator of the dough thickness
3.2 Safety device
In front of the movable plate:
G- Movable hand protection
WARNING
Wile the machine is operating the hand protection is activated if: it ls pushed upwards
because there are foreign elements: if so, it reverses the movements of the lower plate
making it go back down.
iP 33-45
Operating manual
28