P4 - External Fan; J1 - In-Out - Agilent Technologies Turbo-V 1K-G Bedienungshandbuch

P4 – External Fan
Figure 9
This is a dedicated 24 Vdc connector to supply the optional external
fan.
J1 – In-Out
Figure 10
This connector carries all the input and output sig-nals to remote
control the Turbo-V 1K-G Retrofit.
It is a 15-pins D type connector; the available signals are detailed in
the table, the following paragraphs describe the signal characteristics
and use.
Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B)
Interconnections – Controller Model 9698978M004
Technical Information
249/294
17