Preparation For Installation - Agilent Technologies Turbo-V 1K-G Bedienungshandbuch

16 Instructions for Use

Preparation for installation

Preparation for installation

The Turbo-V 1K-G Retrofit is supplied in a special protective packing.
If this shows signs of damage which may have occurred during
transport, contact your local sales office.
When unpacking the system, be sure not to drop it and avoid any
kind of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100% recyclable and complies with EEC Directive
85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the Tur-bo-V 1K-G Retrofit.
NOTE
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
Figure 1
230/294 Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B)