Inhaltsverzeichnis
Werbung
ATTENTION!
END OF COOKING.
Fig. F
Fig. F. At the end of cooking cycle you will hear an acoustic signal.
Pressing the icon on the side, the buzzer will be interrupted.
At the same time, the display shows a message indicating the end of cooking cycle.
4.7 FAST COOLING
Fig. G. Pressing the button shown on the side, you start the fast cooling of the cooking chamber.
The starting of cooling cycle is confirmed by the led of the corresponding button.
If a cooking phase is on (the green led above the start button is also on) , it's necessary to interrupt
it to start the fast cooling.
Pressing the start button, the green led will switch off, to confirm that cooking process has been interrupted.
If a pre-heating phase is on, it's necessary to press the start button twice (with a first touch it switches from
pre-heating to cooking, a second touch will interrupt cooking).
Fig. H. When you press fast cooling button you activate buzzer and a message warns to open the
door to facilitate fast cooling.
It's possible to interrupt the buzzer by pressing the corresponding icon.
NOTE: the cooling cycle can be activated also without opening the door, but if you open the door the temper-
ature drops quicker. The cooling cycle stops automatically when the cooking chamber temperature reaches 45
°C but it can be interrupted at any time by pressing the correspondent button.
NOTE: the fast cooling is activated by default with high speed fan. It's possible to activate also reduced venti-
lation during cooling cycle.
5.0 AUTOMATIC COOKING PROGRAM
Fig. L. From the home page, by pressing the icon shown on the side, you can access the groups of
automatic cooking programs.
The corresponding screen is the one shown on the side.
The automatic cooking programs are divided into 6 groups based on the type of food:
•
Automatic cooking programs meat
•
Automatic cooking programs fish
•
Automatic cooking programs vegetables
•
Automatic cooking programs pastry & bakery
•
Automatic cooking programs rice & pasta
•
Pre-cooked food regeneration programs
Fig. M. By pressing one among the icons corresponding to the 6 groups of automatic cooking pro-
grams, you can access the list of programs that form the selected group.
The possible operations in this screen are the following:
• Select a program from the list to effect a cooking cycle or modify it.
• Scroll the list pressing the icon "more" here below on the right side.
• Add a new program pressing the icon "new" here below on the left side.
• Go back to previous screen pressing the icon Back.
• Go back to previous screen pressing the icon Home.
COOLING CYCLE
OPEN THE DOOR
TO ACHIEVE
COOKING CHAMBER
COOLING
Fig. G
Fig. H
IS ON
Fig. L
9
EN
1.5 KG ROAST CHICKEN
ROAST CHICKEN LEGS
ROAST CHICK.BREASTS
ROAST CHICKEN WINGS
CHICKEN CROQUETTES
ROAST TURKEY LEGS
NEW
MORE
Fig. M
Werbung
Inhaltsverzeichnis
