Inhaltsverzeichnis
Werbung
EN
1.5 KG ROAST CHICKEN
Fig. A
5.2 MODIFICATION OF AN AUTOMATIC COOKING PROGRAM
Fig. A. It's possible to modify temporarily or permanently both factory programs and also the ones created by
the user.
After you have selected an automatic program, the possible modifications are the following:
• Modification of the program's name
• Parameters modification for one or more phases.
• Modification of additional functions for one or more phases.
• Add one or more phases at the end of the program (until max. 6 phases).
Fig. B. Pressing the name of the program, a keyboard appears on the display to enter the new name. After you
have entered the new name, press the icon OK.
If you press OK without digiting anything, the name will remain the same.
Pressing the icon Back, the oven switches to the previous screen without doing any modification.
Fig. C. After you have selected a program, if you press the number corresponding to a phase of the program,
you will visualize the set parameters for the selected phase.
The phases that make a program are the ones with a light blue frame.
The "+" phase is the first free after the configured ones.
The phases with grey frame are unused.
On the control panel the leds are turned on next to the buttons of parameters used for the selected phase. In
the example shown, cooking chamber temperature and time have been selected.
Fig. D. Pressing the rectangular icon of one among the parameters, you will visualize the keyboard
to modify the value. In the example here on the side you can see the modification of the cooking
chamber temperature set. After you have introduced the new value, press OK to confirm and store
it. NOTE: if the selected phase is in steam mode, the value for the percentage of humidification
cannot be modified.
Fig. E. Besides the cooking parameters, it's possible to activate or deactivate one or more additional functions.
The eventual additional functions activated in the selected phase are indicated by the lighted leds next to the
buttons:
•
Autoreverse
•
Low speed ventilation
•
Open release valve
Fig. F. If some modifications have been effected, pressing the start/stop button to start an auto-
matic program, the oven visualizes the message shown on the side.
Pressing the icon YES, the automatic program will be effected with the introduced modifications and
at the end of the cooking cycle the modifications will be maintained.
Pressing the icon NO, the automatic program will be effected with the introduced modifications, but at the end
of the cooking cycle, the oven will re-establish the previous configuration.
Pressing the icon Back without starting the modified program, you will be asked to save modifica-
tions.
NOTE: All programs, that have been modified compared with factory configuration, will be visual-
ized in the list of programs in a rectangular frame, dark blue color instead of light blue.
1.5 KG ROAST CHICKEN
1.5 KG ROAST CHICKEN
Fig. B
Fig. C
Fig. D
12
Fig. E
Werbung
Inhaltsverzeichnis
