Inhaltsverzeichnis
Werbung
EN
4.1 STARTING OF THE OVEN
Switch on the water interception valves and the protection electric switch, installed upstream.
Press the ON/OFF key and wait few seconds for the lighting of the display.
ATTENTION! Turning the oven off through the button ON/OFF does not interrupt the power supply
to the electronic boards.
If the oven is not used we advise you to switch off electric power supply using the protection switch upstream.
4.2 DESCRIPTION OF PROGRAMMABLE CONTROL PANEL COMPONENTS
A
ON/OFF button to turn the oven on and off
C
5" touch screen display
D
Cooking chamber temperature button
E
Delta T function button
F
Cooking time button
G
Temperature core probe button
H
Cook & Hold function button
M
Chamber lighting button
N
Display set button
P
Autoreverse button
R
Reduced ventilation button
S
Cooking /programs starting button
T
Fast cooling button
V
Release valve on/off button
Z
Program cancellation button
4.3 SELECTION OF A MANUAL COOKING IN CONVECTION MODE
To configure a manual cooking in convection mode, in the home page
press the icon with the symbol on the side. The display and the but-
tons on the control panel visualize the following info:
3 rectangular icons indicate the parameters used to control cooking process.
In the example shown on the side these parameters are the following:
• Cooking chamber temperature (the value shown indicates the real temperature
inside the cooking chamber).
• Humidification percentage (this value is by default 0).
• Cooking time (this value is by default 10 minutes).
The lighted leds next to the buttons cooking chamber temperature and cooking
time confirm the parameters used to manage cooking.
The switched off leds of the buttons autoreverse and low speed indicate that
these functions have not been activated. The switched off led of the release valve
button indicates that the release valve is closed.
4
Z
Werbung
Inhaltsverzeichnis
