Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up Of The Device/Introduction; General Operation - Clatronic mc 1033 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
29 Pick-up arm support/catch
30 Guide lever
31 Central spindle
32 Turntable
33 Hood
Remote Control
1 INFO button
2 REC button (encoding function)
3
II button (play/pause)
4
(stop) button
5 SOURCE button
6 Battery compartment
7 FOLDER
8 I
SKIP / SEARCH
(forward search/ reverse search)
9 REP/INTRO/RAN button (repeat / random)
10 FIND button
11 PROGRAM button

Start-up of the device/Introduction

Read the operating instructions thoroughly before the start-up!
Select an appropriate location for the device and loudspea-
kers. An example of an appropriate location is a fl at (hori-
zontal), dry, non-slip surface on which it can be operated
without diffi culty.
Make sure that the device is adequately ventilated!
Connect the loudspeakers to the back of the music centre to
the sockets market „SPEAKER R and L" (25).
Insert the plug into a properly installed 230 V, 50 Hz power
socket. Please ensure that the mains voltage corresponds to
the information on the type plate.
Remote Control Batteries
Open the lid of the battery compartment on the back of the
remote control.
Insert 2 batteries of type R03 „AAA" 1.5 V (not supplied).
Ensure that the polarity is correct (see the fl oor of the
battery compartment)!
Close the battery compartment.
If the remote control is not used for a prolonged period,
remove the batteries in order to prevent battery acid leaking.
Different battery types or new and used batteries must not
be used together.
CAUTION:
Batteries are not to be disposed of together with domestic
wastes. Dispose of the used batteries at the relevant collection
bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fi re. There is a danger
of explosion!
CD deck transport protection
Please open the CD compartment (17) by pressing the
button (8).
38
05-MC 1033 CD.indd 38
05-MC 1033 CD.indd 38
/
button (album down / album up)
I buttons
Remove the transport protection from the CD player if
present before use.
Headphone Socket (20)
Please use headphones with a 3.5 mm stereo jack plug; these
should be inserted into the
„ "
socket. The loudspeakers are
then switched off.

General Operation

NOTE:
Some keys are to be found both on the device itself and on
the remote control. Keys with the same designation have the
same function.
Switch-off
The machine is switched off when the function selector switch
(16) is turned to the OFF position. The POWER control lamp
goes off. Unplug the device.
Volume
You can set the desired volume using the -/+ VOLUME control
(2). Keep the corresponding button pressed down until the
desired volume has been reached.
Infrared remote control
For operating the music centre from a distance of up to 5 metres
without a lead. If the range of the remote control is reduced, the
batteries have to be replaced. During operation ensure that there
is nothing blocking the direct line between the remote control
and the sensor (14) on the machine.
USB Connexion (19)
This device has been developed in accordance with the latest
technical developments in the USB fi eld. Unfortunately the large
number of different types of USB storage media on offer today
makes it impossible to guarantee full compatibility with all USB
storage media. For this reason there may be problems in rare
cases with playing back from USB storage media. This is not a
malfunction of the device.
1. Turn the function selector switch (16) to the CD/USB/SD
position.
2. Connect a USB storage medium.
3. Press the SOURCE button (3/5). The letters „
in the display. The device is now in USB mode. After a few
seconds the total number of folders and songs/tracks is
shown in the display.
4. Press II (7/3) to play back the music data.
5. For operating instructions please see the section "Playing
CDs/MP3s".
6. If the USB connection is no longer required, press the
SOURCE button twice (3/5) button twice. The word CD
appears in the display. The device is now in CD/MP3 mode.
CAUTION:
Before you remove the USB storage medium, turn the function
selector switch (16) to TUNER.
" appear
13.11.2007 8:28:49 Uhr
13.11.2007 8:28:49 Uhr

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis