Programmed Play; Cleaning And Maintenance; Technical Data; After The Expiry Of The Guarantee - Clatronic mc 1027 cd mp3 Bedienungsanleitung

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the STOP key (15/4).
2. Press the PROGRAM key (18). The number „P01"
(storage location) and the symbol PROGRAM fl ash
in the display (13). Use the I
(16/5) to select the desired track and then press the
PROGRAM button (18) again. The display changes to
memory slot P02.
3. Select the next track with the I
press the PROGRAM key again. Repeat the procedu-
re until all the desired tracks are selected.
4. Press the II PLAY/PAUSE key (14/3). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol
MP3 and PROGRAM light up. Press this button to
pause briefl y the playback.
5. Press once the STOP key (15/4) to stop the play-
back while retaining the program.
6. To resume the playback of the program press fi rst the
PROGRAM key (18) once and then the
PAUSE key (14/3).
7. To delete the program, press the
twice. The PROGRAM control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed or-
der of tracks remains in the memory until you change to a
different mode, remove the CD from the CD compartment
or switch off the device.
It is also possible to combine the programmed tracks with
the REPEAT function. After you have programmed and
started the device, please press the MODE button (17/8)
up to three times and then you can use the functions as
described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music
in MP3 format. The device also supports all standard CD
types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs.
Your machine detects an MP3 CD automatically (the total
number of tracks and MP3s appears in the display). If you
would like to play one of these CDs, proceed as descri-
bed under „Playing CDs". Tracks can be programmed as
described under „Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compressi-
on methods, as well as quality differences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there
are problems with the playback of CDs and MP3 CDs.
This is not a malfunction of the device.
32
05-MC 1027 CD/MP3 32
•
•
/ I buttons
Model: .................................................. MC 1027 CD/MP3
Power supply: ................................................230 V, 50 Hz
/ I key and
Power consumption: .................................................. 15 W
Battery operation
or
Protection class: .............................................................. ΙΙ
Radio section:
II PLAY/
This device has been tested according to all relevant cur-
STOP key (15/4)
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are to
be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee repairs can be carried
by the competent dealer or repair service against the
payment of the ensuing costs.

Cleaning and Maintenance

Always remove the mains plug before cleaning the
machine.
Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.

Technical Data

(Remote Control): ............... 2x 1,5 V, Type R03 „AAA"
Frequency ranges: ......... UKW / FM 87,5 ~ 108,0 MHz
............... MW / AM 520 ~ 1640 kHz
Guarantee

After the expiry of the guarantee

11.01.2006, 9:36:54 Uhr