Listening To The Radio; Playing Cds / Mp3 - Clatronic mc 1033 Bedienungsanleitung

SD/MMC Card Slot (18)
1. If you would like to play back data on an SD/MMC card,
insert it into the appropriate opening.
2. Press the SD/MMC card into the opening provided until it
clicks into place.
3. Turn the function selector switch (16) to the CD/USB/SD
position.
4. Press the SOURCE button twice (3/5). The letters „ "
appear in the display. The device is now in SD/MMC
mode. After a few seconds the total number of folders and
songs/tracks is shown in the display.
5. Press II (7/3) to play back the music data.
6. For operating instructions please see the section "Playing
CDs/MP3s".
7. Is the SD/MMC card slot is no longer required, press the
SOURCE button (3/5) once. The word CD appears in the
display. The device is now in CD/MP3 mode.
8. Press the SD/MMC card again to remove it.

Listening to the Radio

1. Turn the function selector switch (16) to the TUNER position.
2. Select the desired frequency band with the band selection
switch (15).
Medium Wave = AM (Mono);
VHF (Stereo) = FM ST; VHF = FM
3. Tune in the desired station with the station adjustment knob
TUNING (12).
4. The FM ST control lamp (10) only lights up when you have
selected FM stereo and the station is being received in
stereo quality. If reception is too weak and there is noise
on the station being received, this lamp will fl icker. Try to
improve reception by turning and bending or twisting and
altering the length of the antenna (24). Where reception is
bad we recommend switching to FM (Mono).
5. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station by
turning it. In this frequency band programs are transmitted in
„mono" only.
Using the Record Player
1. Push the function selection switch (16) to PHONO.
2. Open the hood (33) by pulling the lid on the front upwards.
3. Place a record on the turntable. If you are using a 45 rpm
single, fi rst place the adapter (puck) (26) on the central
spindle.
4. Release the catch on the pick-up arm support (29) and
remove the stylus protector.
5. Select the appropriate speed with the speed selection switch
(28).
6. Use the pick-up lever (27) to raise the pick-up. Guide the
pick-up over the outer edge of the record with the help of the
guide lever (30). The turntable begins to rotate automatical-
ly. Use the pick-up lever again to lower the pick-up.
7. AUTO STOP ON/OFF switch (22): At the end of the record
the turntable stops rotating automatically if you have turned
the AUTO STOP ON/OFF switch on the back of the device
to „ON".
05-MC 1033 CD.indd 39 05-MC 1033 CD.indd 39
NOTE:
With some records it is possible that the turntable stops
rotating before the end of the record is reached as the
switch off end is located outside the radius. In this case
turn the AUTO STOP ON/OFF switch to „OFF". With the
setting the turntable continues to turn when the pick-up is
still on the pick-up arm support.
8. When you have fi nished listening to records place the pick-
up arm carefully on the support, lock the catch and replace
the stylus protector.

Playing CDs / MP3

This is how you play a CD
1. Turn the function selector switch (16) to the „CD/USB/SD"
position.
2. In order to open the CD compartment, press the
(8).
3. Insert a CD with the printed side facing upwards into the CD
compartment and press the
re-close the CD compartment.
4. The word CD appears in the display. The device is now in
CD/MP3 mode.
5. After a few seconds the total number of songs/tracks is
shown in the display.
In the case of a CD in MP3 format the total number of
folders and songs/tracks is shown after a few seconds.
6. Press the II button (7) (3 on the remote control) in order
to play the CD. The CD will play from the fi rst title. The track
currently being played, CD or
the display.
7. To remove a CD, press the
control), open the CD deck with the
the CD carefully.
Please keep the CD compartment closed at all times.
NOTE:
• If a disk has being inserted correctly, or if there is no disk
inserted, „CD READ" fl ashes in the display and the word
„NO DISC" appears.
• Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
Description of the CD buttons
II (7/3)
You can briefl y interrupt and resume playback using this button.
The playing time that has elapsed fl ashes in the display. Pres-
sing again continues playback.
SOURCE (3/5)
Press this button to switch between the CD/MP3 mode and the
USB/CARD mode. The word CD, „
display.
button
button (8) again in order to
CD, MP3 are shown in
key (7) (4 on the remote
key (8) and take out
" or „ " appears in the
39
13.11.2007 8:28:49 Uhr 13.11.2007 8:28:49 Uhr