Parkside PDMS 6.3 A1 Originalbetriebsanleitung Seite 31

■ Always wear suitable protec-
tive clothing.
Protect your hands, hair and
clothes from being drawn in by
rotating parts.
■ Always wear a dust mask in sit-
uations in which dust is being
generated.
■ Always wear ear muffs.
■ Always wear protective gloves.
■ Only connect the grinder to
the compressed-air supply
when it has been switched off
and when the tool has been
clamped.
■ Sparks are created during
grinding. Ensure that nobody
can be endangered by flying
sparks. You should also remove
any flammable materials or
objects.
■ Do not carry the grinder if it
has been connected to the
compressed-air hose.
■ Be aware of the danger
caused by a flailing com-
pressed-air hose!
■ The grinder may not be used
for drilling or screwing!
│ GB │ IE
■ 28
■ The grinder is not approved for
use with cutting discs!
■ The flow pressure of 6.3 bar
may not be exceeded during
operation.
■ Never use oxygen or other
flammable gases as an energy
source.
■ Once you have completed
your work, switch the grinder
off and place it down securely
once it has come to a stand-
still.
Caution! The grinder continues
to run on.
■ Once you have complet-
ed your work, disconnect
the grinder from the com-
pressed-air supply.
■ Be aware that when process-
ing certain materials there is a
danger that dust and vapours
can arise that could create an
explosive atmosphere. Use
vacuum cleaners and suitable
protective equipment.
PDMS 6.3 A1