Hazards Caused By Repetitive Movements - Parkside PDMS 6.3 A1 Originalbetriebsanleitung

■ Hold the machine correctly:
be ready to counteract any
normal or sudden movements -
have both hands ready.
■ Ensure that your body is
balanced and that you have a
secure standing position.
■ Use only lubricants recom-
mended by the manufacturer.
■ Suitable safety goggles must
be worn; wearing protective
gloves and safety clothing is
recommended.
■ A rotating file may not be
operated at a speed higher
than its nominal speed.
■ Wear a safety helmet if work-
ing above head height.
■ Please note that the machine
tool continues to run after com-
pletion of the working process.
■ Warning: there is a risk of
explosion or fire due to the
material being worked.
■ Release the start/stop control
in case of a disruption to the
electricity supply.
│ GB │ IE
■ 30
Hazards caused by
repetitive movements
■ When using a mini die grinder
to perform work-related activi-
ties, operators may experience
uncomfortable sensations in
their hands and arms, as well
as in the neck and shoulders
or other parts of the body.
■ When using a mini die grinder,
the operator should adopt a
comfortable posture whilst
ensuring a secure hold and
avoiding awkward postures
or positions in which it is
difficult to maintain balance.
The operator should change
positions during long-lasting
tasks. This can be helpful in the
prevention of discomfort and
fatigue.
■ If the operator notices symp-
toms such as persistent or
recurring illness, discomfort,
throbbing, pain, tingling,
burning or stiffness, these indi-
cations should not be ignored.
In this case, the operator
should consult a suitably quali-
fied physician.
PDMS 6.3 A1