Work Area Safety; Safety Information - Parkside PDMS 6.3 A1 Originalbetriebsanleitung

■ The mini die grinder should
only be adjusted, set or used
by adequately qualified and
trained operators.
■ This mini die grinder must not
be modified. Modifications
can reduce the effectiveness
of the safety measures and
increase the risks for the
operator.
■ Never use damaged ma-
chines.
Save all warnings and
instructions for future refer-
ence.
The safety instructions should
not be lost – give them to the
operator.

Work area safety

■ Keep work area clean and
well lit.
Cluttered or dark areas invite
accidents.
■ Slipping, tripping and falling
are the main causes of injuries
in the workplace. Watch out
for surfaces which could have
become slippery through use
of the machine, and also any
PDMS 6.3 A1
tripping hazards caused by air
or hydraulic hoses.
■ Proceed with caution in
unknown surroundings. Hidden
hazards caused by power
or other supply lines may be
present.
■ Do not work with the com-
pressed-air tool in areas sub-
ject to the risk of explosions,
or in areas where flammable
liquids, gases or dusts are
located. Grinding work creates
sparks which may ignite the
dust or fumes.
■ Keep children and other
unauthorised personnel at a
safe distance when using com-
pressed-air tools. Distractions
can cause you to lose control.
■ The grinder is not insulated
against electrical power
sources.

Safety information

■ Always wear eye protec-
tion when using or maintaining
the sander.
GB │ IE │
27 ■