Herunterladen Inhalt Inhalt Diese Seite drucken

Dálkové Ovládání - ATMOS SEC Serie Bedienungs- Und Wartungsanleitung

Schraubenverdichter
Inhaltsverzeichnis

Werbung

3.1.2.
Dálkové ovládání
Kompresor je přizpůsoben pro připojení dálkového ovládání nebo
nadřazeného systému řízení při sestavě dvou a více kompresorů.
Při požadavku na řízení více kompresorů kontaktujte servisní
středisko.
Při dálkovém ovládání musí být kompresor zapnutý.
3.2.
NASTAVENÍ ČASOVÝCH KONSTANT
Nastavení časových konstant doběhu kompresoru, blokování
opětného spuštění apod. se může odlišovat podle konkrétních
provozních podmínek u zákazníka nebo podle provedení
kompresoru.
Nastavení lze při uvedení do provozu v určitých mezích
optimalizovat podle požadavků provozovatele.
Upozornění !
Nastavení provádí pouze autorizovaný servis výrobce !
Remote control
It is possible to connect a remote control or superior control system
for a set of two or more compressors to the compressor. With a
request for controlling more compressors, contact a service centre.
By using a remote control, switch the compressor on first.
SETTING TIME CONSTANTS
Setting time constants compressor afterunning, blocking a restart
etc. may differ regarding specific operating conditions at customer's
or compressor design.
When putting into operation, setting may be optimized to certain
extent according to Operator's requirements.
Caution !
Setting is to be carried out by authorized manufacturer's service
only !
25
Fernsteuerung
Der Verdichter ist für Anschluss der Fernsteuerung oder eines
überordneten Steuersystems bei Zusammenstellung von zwei oder
mehrerer Kompressoren angepasst. Falls mehrere Verdichter gesteuert
werden sollen, wenden sie sich an das Servicezentrum.
Bei Fernsteuerung muss der Verdichter eingeschaltet werden.
ZEITKONSTANTENEINSTELLUNG
Die Zeitkonstanten für Verdichterauslauf, Neuingangsetzungsblockierung
usw. können nach konkreten Betriebsbedingungen beim Kunden oder nach
Verdichterdurchführung verschieden eingestellt werden.
Die Einstellung kann bei Inbetriebsetzung in bestimmten Grenzen nach
Anforderungen des Betreibers optimalisiert werden.
Hinweis!
Die Einstellung kann lediglich der autorisierte Herstellerservice
durchführen!
At 1051 / N1
V.08.2007

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sec 221vSec 300vSec 301v

Inhaltsverzeichnis