RCM BIT 391CB Gebrauch Und Wartung Seite 56

EN
PROBLEM
No water comes out.
Insufficient floor cleaning.
CAUSE
Tank empty.
Solenoid valve enabling
button not pressed.
Tap turned off.
Filter blocked.
Solenoid valve does not
work.
Unsuitable brushes or de-
tergent.
Brush worn.
EN-26
SOLUTION
Fill the tank.
Press the button.
Turn on the tap located at
the bottom of the machine.
Clean the filter.
Call the technical support
service.
Use brushes or detergents
which are suitable for the
type of floor or dirt to be
cleaned.
Replace the brush.