Use; Turning The Appliance On; Putting The Appliance In Standby Mode; Choosing Heating Or Cooling Mode - Atlantic Panama 500 Montageanweisungen

If the control unit is not being used, it is in standby, i.e. it is turned off.
For all the following operations, you must press any key to activate the screen's lighting.
The pictograms for the airing
ted when the appliance leaves the factory).
Refer to pages 24 to 27 to use these energy saving functions.
To turn the appliance on, press the
key for at least 3 seconds.
To put the appliance in standby mode,
press the key for at least 3
seconds.
Pictogram Description
Comfort
Comfort +
Quiet
Boost
Eco
Freeze Protection
and the absence and presence detection
T
URNING THE APPLIANCE ON
P
UTTING THE APPLIANCE IN STANDBY MODE
C
HOOSING HEATING OR COOLING MODE
When should you use this mode?
You are at home.You want a comfortable heating or cooling temperature.
You want even more heat by using the front heating panel.
You are at home.You want the appliance to be quiet.
You want to cool your room quickly.
Mode not available when Cooling
You are out of the house between 12 and 48h.You want to switch to the economical
mode and reduce the temperature.The appliance lowers the temperature by 3.5° C.
Mode not available when Cooling
You are away for more than 48h.The appliance keeps at a Freeze Protection tempe-
rature of about 7°C (cannot be changed).

Use

BOOST
The appliance displays the comfort temperature.
When it is first turned on, the appliance is set to
19°C in Heating mode.
If the heat pump is operating in
play reads 19°C.
If the heat pump is operating in
play reads 26°C.
The screen displays
17
functions are displayed (activa-
BOOST
mode, the dis-
mode, the dis-
BOOST
then turns off.
GB