Installation; 1/ Before Installing Your Appliance; Heating Your Room: Comfort Mode When Heating - Atlantic Panama 500 Montageanweisungen

Installation

/ Before installing your appliance
Rules for installing
This appliance is designed to be installed in residential premises. It is designed to be connected to a hot water generator
(heat pump or boiler). It can be used in all living areas except the bathroom, plant rooms or damp rooms.
If it is installed in the kitchen, the connection box should be installed at least 25 cm from the floor.Avoid installing it close
to a sink.
Do not install your appliance in a bathroom. Do not install your appliance under a fixed socket.
Do not expose your appliance to any rain or water spray and do not place any objects filled with water, e.g. a vase or a
glass, above it.
The appliance's protection index is: IP24.
The appliance must be installed according to best standard practices and in compliance with the standards in force in the
country it is installed in (NFC 15100 for France).
As an ambient temperature probe is integrated in the appliance, you are strongly advised not to install an ambient tem-
perature probe connected to the generator (heat pump, etc.) in the area around the appliance to ensure its best perfor-
mance.The appliance must be handled with care.
Respect the minimum distances from furniture when installing the
appliance to ensure proper operation.
It is importance to leave sufficient space around the appliance to
facilitate its maintenance and servicing.
Keep the appliance away from any air flows that may disrupt its
functioning (e.g. under a controlled mechanical ventilation unit, etc.).
Install the appliance the right way up.
6