Calibrating The Temperature; Returning To The Factory Settings - Atlantic Panama 500 Montageanweisungen

After several hours of heating or cooling, depending on your installation, you may find that the real temperature is diffe-
rent to the one displayed on your appliance. In this case, you can calibrate the displayed temperature.
If the screen is not on, press any key to light up the screen.
Press .
Example in Heating mode: the temperature displayed on your appliance is 20°C.The temperature displayed on your thermometer
is 19°C => Choose a -1°C calibration value.Your appliance will heat the room until it reaches 20°C.
Example in Cooling mode: the temperature displayed on your appliance is 20°C.The temperature displayed on your thermometer
is 19°C => Choose a +1°C calibration value.Your appliance will cool the room until it reaches 19°C.
With your appliance, it is possible to return to the factory settings.
If the screen is not on, press any key to light up the screen.
Simultaneously press
and .

Calibrating the temperature

Returning to the factory settings

,
BOOST
28
With the or keys, choose your calibra-
tion value (between -2°C and 2°C).
Confirm your choice by pressing
twice.
BOOST
The entire screen lights up.
After 30 seconds, the display returns to the
main screen.
BOOST