In Heating mode only.
By using the Pilot wire to program your appliance, you can adjust your appliance's settings to suit your routine. By con-
necting the pilot wire to a central programming unit, a timer, a manager or to your generator equipped with a compati-
ble Pilot wire outlet, you can program your Comfort
You can connect several appliances to a timer.
In COMFORT and COMFORT+ mode, the temperature set with the
used as a reference for the desired temperature requested by the programming.
If the pilot wire is connected to a central programming unit, a timer or a manager, you are advised not to pro-
gram the heat pump, or to program the same temperature periods on the two systems.
Order on your programming unit
COMFORT -1°C
COMFORT -2°C
ECO
FREEZE PROTECTION
STOP
NB : If no order is received via the pilot wire, the appliance heats to the temperature set with the
The Freeze Protection
P
ROGRAMMING YOUR HEATING PERIODS
U
SING THE PILOT WIRE
-1°C compared with the Comfort temperature
-2°C compared with the Comfort temperature
-3,5°C compared with the Comfort temperature
room temperature maintained at about 7° C
heating stops immediately (used for power cut off)
and Stop orders have priority over the
and
temperature periods (refer to your timer's manual).
and
Reduction
and Comfort
22
:
keys is the basic temperature that is
and
keys.
modes.