Maintenance - Servicing; Sustainable Development - Atlantic Panama 500 Montageanweisungen

To maintain the performances of your appliance, you must remove the dust from it about twice a year.
Before cleaning your appliance, disconnect the power supply.
Do not use liquid cleaners or aerosol cleaners. Use a soft cloth, slightly damp if necessary.
The condensate pan must be serviced once a year to avoid any risk of clogging and therefore of leakage (must be part of
the heat pump's servicing).
When it is necessary to clean the filter, the
Put your appliance in standby mode
(press and hold down
Pull out the filter located under the
appliance.
Clean it with a dry cloth or a vacuum
cleaner.
Put it back in place under the
appliance.
You must also clean the grid located
under the appliance.
Turn your appliance on again (press
and hold down ).
To remove the signal lamp, press
and .
The appliance has been designed to limit the quantity of materials used and to be easily recyclable.
This appliance is identified by this symbol.This means that all electrical and electronic products must be strictly
separated from household waste.
A specific recycling circuit for this type of product exists in all countries of the European Union (*), Norway,
Iceland and Lichtenstein.
Do not try to dismantle the product yourself. This could have adverse effects on your health and the environment.
Reprocessing of the coolant, oil and other parts must be carried out by a qualified installer, in compliance with current
social and national legislation.
This appliance must be recycled by a specialised company and should in no case be disposed of with household waste or
at a rubbish tip.
Please contact your installer or local representative for further information.
* According to the national regulations of each member state.

Maintenance - Servicing

signal lamp lights up.You should clean it as follows.
).
BOOST

Sustainable development

The
29
BOOST
signal lamp disappears.
GB