Tst2; Rebound Adjustment - Marzocchi Bomber Suspension Benutzerhandbuch

The TST5 system may be supplied with an optional remote
control, to activate fork blocking.
OPEN
CLOSE
CLOSE - By pressing on the lever, modify the fork's
hydraulic confi guration, supplying a position suitable for
climbs, corresponding to the «CL» position of the TST5,
independently from the position of the adjuster present on
the fork.
OPEN - After blocking, act on the release button to restore the
adjustment previously selected using the TST5 adjuster.
W !
ARNING
NEVER us the "CLOSE" position while riding downhill
as the fork will not react properly when hitting obstacles,
and can result in a loss of control of the bicycle, an
accident, personal injury, or death.

5.3.7 TST2

Available adjusters
TST2 lever command
(2 positions OPEN/CLOSE)
Extended brake knob
The TST2 handles fork behaviour in compression and
rebound by virtue of revolutionary system valves. The TST2
system uses a sealed cartridge completely full of oil.
The TST2 cartridge has a valve through which it is possible
to pressurise the sealed cartridge.
The correct functioning pressure is 2 bar (30 psi); never use
different pressures.

5.3.7.1 Rebound adjustment

Using the expansion adjuster located in the lower part of the
right fork leg, it is possible to control the fork rebound speed
following compression.
A correct adjustment of the rebound speed allows you to
have a stable bike whose wheel can properly react to
obstacles on the trail.
If the adjustment is too reactive, the forecarriage becomes
unstable and the mountain bike may swing. Conversely, a
rebound speed that is too slow makes overcoming multiple
obstacles diffi cult. This is because the suspension cannot
go back to a completely extended position between each
obstacle.
Positions
Right fork leg upper cap
Right wheel axle clamp foot
AIR
75