Suspension Blocking - Marzocchi Bomber Suspension Benutzerhandbuch

• By turning the adjuster clockwise, you increase the
hydraulic damping making the fork slower during the
rebound phase.
• By turning the adjuster counter-clockwise, you reduce the
hydraulic damping making the fork more reactive during
the rebound phase.

5.3.7.2 Suspension blocking

The adjustment has two positions.
CLOSE - When turning the knob clockwise, you activate
the TST2 cartridge function. In this position the travel of the
fork's legs is blocked. This position is only suitable for hard,
steep climbs as it reduces the wobbles of the bike's fore-
carriage.
OPEN - When turning the knob counterclockwise, you reset
the fork's normal function by deactivating the TST2 cartridge
function.
W !
ARNING
NEVER us the "CLOSE" position while riding downhill
as the fork will not react properly when hitting obstacles,
and can result in a loss of control of the bicycle, an
accident, personal injury, or death.
76
CLOSE
By turning the knob, you can adjust the compression
damping and obtain the best setting according to the type
of trai:
CLOSE - Rotate the knob clockwise to activate suspension
block.
OPEN - Rotate the knob anti-clockwise to restore normal
suspension.
The TST2 system can be equipped with an optional remote
command in which case the knob on the fork is replaced by
a command installed on the handlebar.
CLOSE - Press the lever to active suspension block.
OPEN - Press the lever to active suspension block.
OPEN