Removing The Bicycle - Elite REALTOUR Bedienungsanleitung

Insert the DVD in the DVD-Rom and follow the set-up instructions.
ATTENTION: THE VIDEO COURSE INSTALLATION MAY TAKES SEVERAL MINUTES.

REMOVING THE BICYCLE

To remove the bicycle, proceed as follows:
• Remove the console from the handlebar.
• Move the small roller of the resistance unit
away from the tyre, turning the knob of the
unit's support plate counterclockwise (Fig. 32).
• Disconnect the power supply to the roller,
removing the power adapter jack from the re-
sistance unit.
• If installed, remove the cadence sensor from
the bicycle. Otherwise it is possible to also re-
move the magnet from the pedal crank.
INSTALLING THE REALAXIOM VIDEO COURSE
If the installation doesn't start
automatically, explore the CD
and execute the file "setup.exe"
STARTING
THE REALTOUR PROGRAMME
Once the installation procedure has been com-
pleted, the RealTour icon will appear on the
computer desktop. Double-click the RealTour
icon to start the programme.
USING THE REALTOUR PROGRAMME
For information on how to use the RealTour
programme, please consult the programme's
Help menu.
In order to activate the Help menu, first start
the programme, then press F1 or click "Info on
..." in the Help menu.
EN
32
27