Operation
GB
IE
Selecting a function using the function
CY
selector switch
♦
Press and hold the unlocking button for func-
tion selector switch
selector switch
engages at the arrow mark.
The functions are marked as follows:
Function
Drilling / screwdriving
Hammer drilling
Chiselling
Chisel position
adjustment
Adjust chisel position:
You can rotate the tool to the required position for
chiselling using this function.
♦
Rotate the function selector switch
position
.
♦
Rotate the tool into the tool holder
required position.
♦
Rotate the function selector switch
position for the chiselling function.
Select direction of rotation
♦
Select the direction of rotation by adjusting the
right/left rotation switch
WARNING!
►
The right/left running switch
be used / adjusted if the appliance is at a
standstill.
6
and rotate the function
so that the required symbol
Symbol
to
to the
to
.
may only
Switching on and off
Switching the appliance on:
♦
Press the ON/OFF switch
Switching the appliance off :
♦
Release the ON/OFF switch
Switching to continuous operation:
♦
Press the ON/OFF switch
this position with the ON/OFF switch locking
button
.
Switching off continuous operation:
♦
Press the ON/OFF switch
again.
Maintenance and Cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work.
■
The appliance must always be clean, dry and
free from oil or grease.
■
To clean the casing, use a soft cloth.
■
Regularly clean the tool holder
WARNING!
■
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or his representative in order to avoid hazard-
ous situations.
.
.
and lock it in
and release it
.
PBH 440 A1