Appliance-Specific Safety Instructions For Hammer Drills; Original Accessories / Auxiliary Equipment; Operation; Additional Handle - Parkside PBH 1050 C3 Originalbetriebsanleitung

Appliance-specific safety instructions
for hammer drills
■ Wear hearing protection. Exposure
to loud noise can lead to hearing loss.
■ Use the additional handle supplied with the
appliance. Loss of control can lead to injuries.
■ Hold the appliance by the insulated handles
when you are carrying out work during which
the deployed tool may come into contact with
concealed power cables or its own power
cable. Contact with a live wire may electrify
exposed metal parts of the power tool and
could give the operator an electric shock.
■ Wear a dust mask.
WARNING! TOXIC DUST!
► Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
■ CAUTION, POWER CABLES! DANGER!
Ensure that you are not likely to hit power, gas
or water supply lines when you are working
with the power tool. If necessary, check with a
service line detector before you start to cut or
drill into a surface.
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks. The following risks can
occur in relation to the power tool's design and
structure:
1. Lung damage if no suitable dust protection mask
is worn.
2. Hearing damage, if no suitable hearing protection
is worn.
3. Damage to health caused by hand-arm vibrations
if the appliance is used for extended periods or
is not properly used and maintained.
PBH 1050 C3
WARNING!
► The power tool creates an electromagnetic
field during operation. This field can, in
certain circumstances, impair active or pas-
sive medical implants. To reduce the risk of
fatal injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine.
Original accessories / auxiliary
equipment
■ Only use the accessories and additional
equipment which are specified in the
operating instructions and are compatible
with the appliance.

Operation

Additional handle

NOTE
► For safety reasons, you should only use this
appliance with the additional handle
attached.
► The appliance is fitted with an LED
This lights up red as soon as the appliance is
connected to the power supply.
This indicates that the appliance is connected
to the power and that it will turn on immedi-
ately if the ON/OFF switch is pressed
♦ Loosen the strap on the additional handle
by turning it anticlockwise.
♦ Push the additional handle
of the tool holder
♦ Turn the additional handle
position.
.
.
in the direction
.
to the required
GB │ MT │
41 ■