In Case Of Guard Specifications For Both Metal Blade And Cord Cutter - Makita RBC420E Original Bedienungsanleitung

In case of guard specifications for both metal blade and
cord cutter
- When using the metal blade, install the protector (4) onto the clamp (3) with two
M6 x 30 bolts (2).
Note: Tighten the right and left bolts evenly so that the gap between the clamp (3)
and the protector (4) will be constant.
Otherwise, the protector sometimes may not function as specified.
- When using the cord cutter, insert the protector (2) into the protector (1), and
tighten with two screws (4) and two nuts (3).
13