Proper Handling Of Machine; Brush Cutter Operation - Makita RBC420E Original Bedienungsanleitung

Proper handling of machine

Attachment of shoulder strap
- Adjust the strap length so that the cutter blade will be kept parallel with the ground.
Detachment
- In an emergency, pull the release belt (1) strongly upward, and you can quickly
detach the machine from the shoulder strap. Be extremely cautious to maintain
control of the machine at this time. Do not allow the machine to be deflected
toward you or any one In the work vicinity.
WARNING: Failure to maintain complete control of the machine at all times
could result in serious bodily injury or DEATH.

Brush cutter operation

Observe all applicable accident prevention regulations!
Starting
Select bare ground for fuelling and move at least 10 feet (3 m) from fueling spot
before starting the engine. Place the brush cutter on an open area of ground taking
care that the cutting tool does not come into contact with the ground or any other
objects. Make sure that the area is clear of combustible materials.
Cold start
- Push the ON-OFF switch (1) in the direction shown by the arrow.
- Grasp the handle (hand pressure activates the safety lock-off lever (2)).
- Press the throttle lever (3) and hold it down.
- Press the lock button (4) and release the throttle lever. Then release the lock
button (the lock button holds the throttle lever at the proper start-up position).
16