Trouble Shooting
Problem
Device doesn't start
Device works with
interruptions
Engine is slowing
down and stops
Poor grinding
performance
Sanding sheet wears
down quickly
Possible Cause
Mains voltage missing
Main circuit breaker is
tripped
On/off switch (
be defective
Engine faulty
Internal loose contact
On/off switch (
broken
Device is overloaded
through workpiece
Sanding sheet unsuitable
for the workpiece to be
processed
Worn sanding sheet
Sanding sheet unsuitable
for the workpiece to be
processed
Error correction
Check the socket, mains cable, line,
mains plug, repairs to be carried
sary, check main circuit breaker.
1) may
Repair by Customer Care
Repair by Customer Care
1) is
Reduce pressure on grinding tool
Workpiece unsuitable
Use a suitable sanding sheet or
structions")
sembling instructions")
Use a suitable sanding sheet (see
Reduce the pressure
G B
IE
NI
-
-
1 5
-