Notes On Safety; Symbols; Symbols In The Manual; General Safety Instructions For Power Tools - Parkside PHS 160 E5 Originalbetriebsanleitung

G B IE NI

Notes on Safety

tions for working with the appliance.

Symbols

Symbols on the Equipment
Warning!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Read through the instruction manual
carefully.
Wear ear and eye protection
Wear breathing protection
Wear safety gloves
Protection class II
(Double insulation)
Electrical appliances must not
be disposed of with the domestic
waste.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with information
on preventing damage.
Connect the machine to the power
supply.
6
Pull the mains plug.
- Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can cause
injuries.
Retain all safety directions and in-
structions for future use.
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
• Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapt-
er plugs with earthed (grounded)
power tools.