17
Technical Information
How to Connect the Open-Collector Inputs of the Controller
Figure 24
How to Connect the Open-Collector Inputs of the
Controller
Here below there are the typical connections of the open collector
input of the integrated controller to an external system. Two cases
are considered:
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
254/300
TV 551/701 Navigator User Manual / 87-900-934-01
(M)