How To Connect The Open Collector Input Of The Controller - Agilent Technologies TPS-compact 969-8217 Bedienungshandbuch

17 Technical Information
Interconnections
How to Connect the Open Collector Input of the
Controller
Here below there are the typical connections of the open collector
input of TPS-compact to an external system. Two cases are
considered:
1.
2.
Please note that on the connector a 24 Vdc, 30 mA voltage, a
GROUND signal and the open collector pin are available.
Figure 32
232/262
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
Case 1
TPS-compact User Manual / 87-901-010-01 (C)