How To Connect The Open Collector Inputs Of The Controller - Agilent Technologies TV 301 Navigator Bedienungshandbuch

Figure 20
How to Connect the Open Collector Inputs of the
Controller
Here below there are the typical connections of the open collector
input of the integrated controller to an external system. Two cases
are considered:
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
TV 301 Navigator User Manual / 87-900-946-01

How to Connect the Open Collector Inputs of the Controller

(M)
Technical Information
235/282
17