Setting Of Dip Switches And Rsw Switches; Outdoor Unit; Location Of Dip Switches And Rotary Switches - Hitachi YUTAKI Serie Installations- Und Betriebshandbuch

ELECTRICAL AND CONTROL SETTINGS

7.3 SETTING OF DIP SWITCHES AND RSW SWITCHES

7.3.1 Outdoor unit

7.3.1.1 Location of DIP switches and rotary switches

The PCB in the outdoor unit is operating with DIP switches and push switches. The location is as follows:
RAS-(2/2.5)WHVNP
PCB1
RAS-(3-10)WH(V)NPE
?
N O T E
DIP-IPM or PCB2 (depending on model) has a DSW1. When pin number 1 is set to ON position, the electrical current detections is cancelled. Pin
number 1 should be to OFF position after electrical work.
99 PMML0335A rev.1 - 04/2016