Positions Of The Legs; Tips For Use - Auping K2 type 33 Gebrauchsanweisung

3.3 Positions of the legs

Correct placement of the legs is
essential for a correct weight distri-
bution. This means that the legs must
be placed as indicated below.
(K2 supporting leg sets are optional)
Length 190/200 cm:
Length 210/220 cm:
Head (H)
Foot (F)
H 20 cm F 20 cm
H 30 cm F 30 cm
3.4 Preparing for use
Check that the mesh base can move
freely. Only adjust the mesh base while
it is in a horizontal position, securely
fixed to the supporting legs, or to the
supports provided withon the bed
surround.
Check that the mattress is attached to
the mesh base properly.

3.5 Tips for use

A new mattress has a certain amount
of rigidity, which will disappear within a
few days. Consequently,
mattress will not optimally follow the
contours of the mesh base when it is
initially adjusted.
recommend that you lie down on the
mattress while adjusting the positions
for the first time.
your
We therefore
GB5