Positions Of The Legs; Preparing For Use; Tips For Use - Auping K2 Typ 11 Gebrauchsanweisung

3.3 Positions of the legs

Correct placement of the legs is essential for
a correct weight distribution. This means
that the legs must be placed at the distances
from head and foot end of the bed as
indicated in the following illustration (bed
seen from above):
Head (H)
Foot (F)
Length 190/200 cm:
Length 210/220 cm:

3.4 Preparing for use

Check that the mesh base can move freely.
Only adjust the mesh base while it is in a
horizontal position, securely fixed to the
supporting legs.
Check that the Aupingmattress is attached
to the mesh base properly.
GB12
_008EP_3155 BinnenW.pdf - pag.12
H 20 cm F 20 cm
H 30 cm F 30 cm
LET OP !!! Lage resolutie!

3.5 Tips for use

A new mattress has a certain amount of
rigidity, which will disappear within a few
days. Consequently, your mattress will not
optimally follow the contours of the mesh
base when it is initially adjusted. We
therefore recommend that you lie down on
the mattress while adjusting the positions for
the first time.
November 21, 2007