Malfunctions - Auping K2 type 33 Gebrauchsanweisung

5. Malfunctions

Undesirable noises (bed squeaks and
creaks)
Unwanted noises are usually caused
by moving parts touching each other.
The reason for this may be a missing
part, or parts that have not been
tightened up properly or have become
loose when the bed was moved.
Check that:
- the bed is properly horizontal;
- the bed is positioned away from the
wall;
- there are no unwanted objects in the
bed that should not be there (spoons,
forks, pens, etc.).
Important!
A malfunctioning gas spring may
cause the back section to come up
automatically without remaining in a
fixed position. Before consulting your
dealer, please make sure that the
operating cord and cord guide can
move freely and are not trapped
between parts of the bed or mesh
base.
GB9