Control Panel - JB-Lighting VaryLED 3*84 Bedienungsanleitung

3. Control panel

CAUTION!
Disconnectmains
beforeopening
To adjust the personal setting of the VaryLED 3*84 use keys located on the
control panel. Functions see menu on the following page.
To enter the menu press "Menu" key one time.
Use keys "-" and "+" to move within the menu.
Use key "Enter" to select the function and to recall the next menu section.
To escape press key "Menu".
Special functions are assigned to the display lighting:
During reset the display is not illuminated.
Slow flashing of the display illumination means no DMX signal is connected.
Fast flashing of the display illumination showing
was reported and stored in the ERROR LIST (To clear - see menu navigation on
page 8).
Fast flashing of the display illumination showing an error message means an
currentl failure is reported, e. g.
our service department.
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein Telefon +49 (0)7304-9617-0
VaryLED 3/84
*PAN TIMEOUT - please contact your dealer or
VaryLED 3*84
230V 50Hz
240 VA
means a failure
21