Control Panel - JB-Lighting VaryLED Anleitung

3. Control panel

VaryLED 3*84
230V 50-60Hz
330 VA
CAUTION!
Disconnect mains
before opening
To adjust the personal setting of the VaryLED 3*84 use keys located on the
control panel. Functions see menu on the following page.
To enter the menu press "Menu" key one time. Use keys "-" and "+" to move
within the menu. Use key "Enter" to select the function and to recall the next
menu section. To escape press key "Menu".
Special functions are assigned to the display lighting:
During reset the display is not illuminated.
Slow flashing of the display illumination means no DMX signal is connected.
Fast flashing of the display illumination showing VaryLED 3/84 means a failure
was reported and stored in the ERROR LIST (To clear - see menu navigation on
page 8).
Fast flashing of the display illumination showing an error message means an
current failure is reported, e. g. *PAN TIMEOUT - please contact your dealer or
our service department.
If the VaryLED receives a DMX-signal the display illumination dims down after 30
seconds in order not to irritated during standard opperation.
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein Telefon +49 (0)7304-9617-0
23